Ferrari F355TT @ Drags

[SPEEDCORE]

http://www.fullboost.com.au/content/...4_12_355tt.avi

Ferrari 355 with Twin Turbo.

Calder street meet in Oz on the 17th this month.
11.3
They were saying it will be doing 10's by the new year

[dingo]

oh this must be the one I was reading about on FerrariChat.....sounds interesting.
If I remember correctly its been modded by Nizpro and has about 540rwhp :shock:

EDIT: I just found where I read about it, and if its the same one then it has 450kW at the rear wheels :shock: It still sounds pretty nice IMO, and must be awesome to drive around.

Thanks for the video, loved it.

[Mopsdrops]

wow, thank you for the video, but the sound isn't so nice imo, especially not against the stock sounds of the F355, but it's very fast...

[dons5]

ya but how long will that car last lol

[dingo]

Here is some more info on the upgrades:

Two Packages are offered as follows:

1) 575flywheel hp (355kW) at wheels (6-psi boost)

· Pre-programmed MoTeC ECU M800 with plug in loom adaptors (can be upgraded to include traction control, Lambda, logging and so forth).
· MoTeC loom and associated fuses.
· High-flow 4-spray fuel injectors.
· 2 x High-flow Garret GT roller bearing turbochargers.
· 45mm Turbosmart wastegate.
· 2 x custom high volume tube and fin intercoolers with cast tanks.
· Thermatic fans on each intercooler with On temperature of 28c and 22c Off via MoTeC switching.
· Custom large volume Air Cleaner box with low restriction K&N filter element mounted under bonnet vent and associated tubing, cast in aluminium in either polished or powder coated finish depending on customer’s requirements.
· Turbocharger exhaust manifolds 3mm stainless steel or cast (depending on application (depending on catalytic converter).
· Same with cast stainless steel wastegate plumbing.
· 2 x Cast aluminium pipe from inlet manifold to intercooler pipes.
· 4 x 76mm rubber ‘hump’ hoses (intercooler/inlet).
· 6 x 76mm silicon rubber hoses (turbocharger to intercooler and turbo to air cleaner plumbing).
· 20 x stainless steel hose clamps.
· 2 x aluminium weld on dash-10 sump fittings for turbo drain back hoses (depending on quantity we will cast a higher volume CNC machined sump with integral drain back holes).
· 2 x braided stainless steel turbo drain back hoses.
· 2 x braided stainless steel turbo feed hoses.
· 4 x braided stainless steel water feed and return hoses.
· All copper washers, banjo bolts, T-pieces, gaskets and hose clamps to suit above.
· High-flow dual inlet and twin outlet 3-inch in and out stainless steel muffler.
· CNC laser cut turbo-mounting bracket.

Indicative current buying price: AU$42,000 + shipping and insurance.

2) 650hp and 400 rwkw (9.5 psi boost)

As above plus:

· High volume package.
· Modified programming.
· Modified wastegate.
· High volume fuel pump.

Indicative current buying price: AU$47,000 + shipping and insurance.

[Wutputt]

Damn fast and quite a lot of mods. But I prefer the sound of the standard f355, although a nice aftermarket exhaust system is allowed

[astonmartinandy]

That's pretty awesome! Have to say it's not my idea of tuning to a 355, it's an interesting alternative to go drag racing with.

[yg60m]

Very impressive but what about reliability ???

[duko]

That's crazy :shock: ... Thnx for the vid dude