I kown a bike that could slay the veryon in corners and whit accleration maby even outbrake it.
Nick slick highly modefied suzuki hayabasa.
Here is the spec list
ENGINE MODIFICATIONS
- 1397 BIG BORE from Orient Express (Tricktape.com)
- Weisco High Compression Pistons
- Cometic Head Gasket
- Orient Express Heavy duty valve springs
- Ported Head with blended seat by Carry Andrew (
www.Hypercycle.com)
- Small box mod with all short stacks
- Brock Hindle GEN III Street Smart system - 4 into 1 full Titanium Exhaust (Tricktape.com)
- MegaCycle/Carpenter Race Cams, .285 lift (110 intake, 110 exhaust)
- Engine built by Carry Andrew (
www.Hypercycle.com)
- High Speed oil pump gear.
- Clutch slave support by Motorhead.
- Hardened starter gear.
- NEW! A&J DUAL INJECTOR NITROUS KIT. - 2 x 35 shot (thru Ram Air Intakes) Total - 70shot.
- Harlan Nitrous Window switch (set ON -6500rpm / set OFF -10500rpm)
- 1LB bottle NOS mounted under rear solo hump thru custom made undertail.
- Steel braided fuel lines with autometer fuel pressure guage.
- YOSHIMURA Engine Management System (EMS) with shift light, gear position sensor, electronic shifter, external serial connection, and accessory hub.
Max Horsepower: 203.5 Engine Only, 255.0 with a 60 shot of nitrous.
HANDLING/STYLING MODIFICATIONS
- SEBIMOTO carbon fiber fairings (full kit. Including tank) provided by YOYODYNE
- Carbontek Carbon Fiber GSXR 1000 style vented front fender and rear hugger.
- Magical Racing Carbon fiber mirrors with integrated turn signals..
- 1/2 Inch shortened swing arm (by milling rear axle reciever on arm, and shortening chain)
- Zero Gravity Double bubble windscreen (Tricktape.com)
- Marvic Magnesium front and rear rims, with aluminum sproket on rear (+2 over stock)
- Ohlins adjustable rear shock built to weight spec for bike by Lindemann Engineering (
http://www.le-suspension.com/)
- NEW! Ohlins Street and Track forks revalved and resprung by Lindemann Engineering (1kilo springs and gold valving)
- Pirelli Supercorsa Tires (Race Compound, Soft front, Medium Rear, 33psi)
- Brembo four pot racing calipers with kit pads and steel braided lines (provided by YOYODYNETI.COM)
- Brembo Discs (provided by YOYODYNETI.COM)
- 1" inch positive ride height adjustment to rear made via dogbone.
- Agras/Mikuni Triple Clamp, lowers front by .5" and increases clip on width by 1" total (TRICKTAPE.COM)
- Agras/Mikuni Adjustable rearsets. (TRICKTAPE.COM)
- Removed: rear passenger foot pegs, CA emissions, rear hump, rear hum locking assembly, all stock turn signals, toolkit, front headlight assembly, etc.)
- ICEMAN LED rear brake lights
- Lasercut gold metallic custom hayabusa decal set by SterlingSilver
- Vanson Leathers
- Roof "Boxer" Helmet
- Icon TIMAX gloves
http://www.nickslick.com/
Linear Mode
